Duet 0.8.5 firmware installation
-
I'm not sure if my duet is fried, but I had to erase and reset my duet 0.8.5 and I have tried installing 2.05 but at the moment it won't do anything, no ethernet connection and no movement even using the display. I cant remember what the latest software I can install is. I think I had Duet2Firmware-2.05.1 installed (and 1.15 on the paneldue display). Is this correct and can I just install this or do I have to install Duet firmware 1.26.1 first? I will try again later today using Fallback procedure #3 (https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware_(Legacy)).
Thanks.
-
@dave-parry, the latest firmware for the Duet 085 is version 1.26.1, but it is the RepRapFirmware.bin file in the 2.05.1 release. Is that the firmware file you installed?
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 It was in the 2.05 bin, but I thought I used the combined file. Will use the 1.26.1 one and let you know what happens.
-
Thanks David, All sorted now. I think I may have used the 2.05 combined file and also the backup config file I used had an old router address on. Anyway back up and running again.
