Solved Movement depending of position

[cosmowave]

Hello everybody,
is it possible to make a z-move depending on the z-position in a macro?

Something like this:
if z-position is less than 100 then move to 100; else no movement

Thanks for your help!

[dc42]

@cosmowave, yes it is if you are using RRF3. See https://duet3d.dozuki.com/Wiki/GCode_Meta_Commands.

[cosmowave]

@dc42 Yes, i'm using RRF3.
Thanks for the info!

[cosmowave]

@dc42
then i can read the actual position like this?

if move.axes[2].userPosition <100
G0 Z100

is that correct?
The second line "G0 Z100" will only run when the actual z-position is less 100?

[cosmowave]

Oh, i have seen now, that the second line has to be intended!
It's all clear now.