Error M280

hbrownell

So, I just did the update to 3.2 and my BL Touch is not connecting apparently.
Error: M280: Invalid servo index 0 in M280 command

From config.g
; Z-Probe
M950 S0 C"exp.heater3" ; create servo pin 0 for BLTouch
M558 P9 C"^zprobe.in" H5 F120 T6000 ; set Z probe type to bltouch and the dive height + speeds
G31 P25 X29 Y-6.5 Z1.2 ; set Z probe trigger value, offset and trigger height
M557 X20:180 Y20:180 S80 ; define mesh grid

; deployprobe.g
; called to deploy a physical Z probe
;
; generated by RepRapFirmware Configuration Tool v3.2.3 on Sun May 16 2021 20:01:35 GMT-0500 (Central Daylight Time)
M280 P0 S10 ; deploy BLTouch

I followed this image to make my connections.

hbrownell

@hbrownell Never mind. I just needed to update the firmware to 3.22.. it was still on 2.05.