Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Updating from 2.02 to 3.0

    Scheduled Pinned Locked Moved Solved
    Firmware installation
    2
    3
    126
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • that guy Eundefined
      that guy E
      last edited by

      Saw that you need to update to 3.0 before moving to any more recent firmware.

      I download the 3.0 zip file. When I upload the zip file the Duet2 goes through the full firmware install process but it is still at 2.02 after update is complete. Any thoughts?

      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @that guy E
        last edited by dc42

        @that-guy-e try upgrading to 2.05.1 using the zip file for that release first. Most likely the IAP file for 2.02 can't handle the size of the 3.0 binary.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        that guy Eundefined 1 Reply Last reply Reply Quote 0
        • that guy Eundefined
          that guy E @dc42
          last edited by

          @dc42 looks like i may've had an old IAP file. went back and download the 2.02 IAP fil and then i was able to upload to 3.0

          Thanks for the quick response.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA