Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Leveling

    Scheduled Pinned Locked Moved
    Firmware installation
    3
    8
    231
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Btjundefined
      Btj
      last edited by

      I can not get to
      M557
      otherwise the probe misses the bed or it becomes only part of the bed

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @Btj
        last edited by

        @btj said in Leveling:

        I can not get to
        M557
        otherwise the probe misses the bed or it becomes only part of the bed

        Lots of information missing there.

        How about telling us in greater detail what you are trying to do and what is not working.

        Thanks.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

        Btjundefined 1 Reply Last reply Reply Quote 0
        • Btjundefined
          Btj @fcwilt
          last edited by

          @fcwilt
          M557 X310:20 Y330:20 S58:62
          Error: M557: bad grid definition: X range too small

          fcwiltundefined 2 Replies Last reply Reply Quote 0
          • fcwiltundefined
            fcwilt @Btj
            last edited by

            @btj said in Leveling:

            @fcwilt
            M557 X310:20 Y330:20 S58:62
            Error: M557: bad grid definition: X range too small

            Well according to that the Xmin is 320 and the Xmax is 20 - which doesn't make a lot of sense.

            And you may find the P parameter is preferable to the S parameter:

            From the M557 docs:

            *Saaa Probe point spacing (RepRapFirmware 1.19beta10 and later also support Saaa:bbb)

            Pnn or Pxx:yy (RRF 2.02 and later) Number of points to probe in the X and Y axis directions (alternative to specifying the probe point spacing)*

            Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

            1 Reply Last reply Reply Quote 0
            • fcwiltundefined
              fcwilt @Btj
              last edited by

              @btj

              I forgot to mention M557 is used with G29 which is part of the mesh compensation feature for improving print quality.

              It is not leveling.

              Leveling, either manual or automatic, is done with G32.

              Frederick

              Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

              Btjundefined 1 Reply Last reply Reply Quote 0
              • Btjundefined
                Btj @fcwilt
                last edited by

                @fcwilt
                G32
                Error: No valid grid defined for bed probing

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  This post is deleted!
                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Please only create a single thread for each issue. This thread is now locked.

                    1 Reply Last reply Reply Quote 0
                    • First post
                      Last post
                    Unless otherwise noted, all forum content is licensed under CC-BY-SA