Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Finer Z Movement Controls during Manual Calibration

    Scheduled Pinned Locked Moved
    Duet Web Control wishlist
    1
    1
    394
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • fcwiltundefined
      fcwilt
      last edited by

      Hi,

      On my deltas I use the manual calibration feature of 1.19.x with a dial indicator replacing the hotend.

      The indicator is accurate to 0.0005"

      The current up/down "jog" buttons displayed are +/- 0.1mm which works out to about 0.004" - which is more coarse than the indicator is capable of.

      If a printer with 1.8 degree stepper motors is capable of meaningful finer resolution I would like to see two additional "jog" buttons using a smaller step size more in line with the capabilities of the indicator - perhaps +/- 0.01?

      Thanks you.

      Frederick

      Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA