3.4.0 b6 Issues

[NeueKlasse]

I've encountered 2 Things after Installation (DWC and RRF)
(before i had beta 5 installed, without issue)

=> The Status is always "Changing Tool", it doesn't Change the Status in DWC as well as on the PanelDue (7i) (Known Issue as far as the changelog says)

=> after Installation and a reboot nomore Macros are displayed on the PanelDue,
(in the Latest Release as well as in the Release before, so the PanelDue Firmware doesn't
create this issue)
The Macros are missing on the Status Page as well as in the Macros tab on PanelDue.
(before the Reboot they were Displayed)

I encountered the Issues on 2 separate MB6HC Boards

[dc42]

@neueklasse said in 3.4.0 b6 Issues:

The Status is always "Changing Tool", it doesn't Change the Status in DWC as well as on the PanelDue (7i)

This is a known issue, fixed in the latest source code. There are preview 3.4beta6+1 builds available at https://www.dropbox.com/sh/wtgcvkuaq52x3aq/AAADVEzSwypcIZSwExX0M4RQa?dl=0.

The Macros are missing on the Status Page as well as in the Macros tab on PanelDue.
(before the Reboot they were Displayed)

This might perhaps be cause by the incorrect status after a tool change.

[NeueKlasse]

@dc42 thanks, that worked!