• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

20 heaters

Scheduled Pinned Locked Moved
Using Duet Controllers
4
5
325
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Aitor
    last edited by 19 Feb 2022, 20:42

    Good morning @dc42,

    If I have 10 independent heads, with 2 resistors each and I want to make a Mirror or copy tool and I need to set the temperatures using the following way:

    G10 P4 S{heat.heaters[1].active,heat.heaters[2].active,heat.heaters[3].active,heat.heaters[4].active,heat.heaters[5].active,heat.heaters[6].active,heat.heaters[7].active,heat.heaters[8].active,heat.heaters[9].active,heat.heaters[10].active,heat.heaters[11].active,heat.heaters[12].active,heat.heaters[13].active,heat.heaters[14].active,heat.heaters[15].active,heat.heaters[16].active,heat.heaters[17].active,heat.heaters[18].active,heat.heaters[19].active,heat.heaters[20].active}
    

    I received this error, it was clear that it was going to happen, but, is there any way to send it in parts?

    Error: in file macro line 1 column 256: M98: GCode command too long

    On the other hand it doesn't allow me to send it like this

    G10 P4 S101:102:103:104:105:106:107:108:109:110:111:112:113:114:115:116:117:118:119:120
    Error: in file macro line 3 column 41: G10: array too long, max length = 8

    This was the error it gave me, it only allows me 8 as far as I understand.

    Thank you

    undefined undefined undefined 3 Replies Last reply 20 Feb 2022, 20:18 Reply Quote 0
    • undefined
      MaracMB @Aitor
      last edited by 20 Feb 2022, 20:18

      @aitor very sorry to jumping in here… but…a 10 individual head machine? 10 ?! 🙂 what kind of hellfire is this? 🙂

      1 Reply Last reply Reply Quote 0
      • undefined
        Stephen6309 @Aitor
        last edited by Stephen6309 20 Feb 2022, 22:02

        @aitor You have 20 heaters on Tool 4?

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators @Aitor
          last edited by dc42 20 Feb 2022, 22:13

          @aitor that's correct, the maximum number of heaters per tool is currently 8 on Duet 3 6HC and Duet 2 WiFi/Ethernet. https://docs.duet3d.com/en/User_manual/RepRapFirmware/RepRapFirmware_overview#firmware-configuration-limits.

          What sort of machine do you have?

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          undefined 1 Reply Last reply 21 Feb 2022, 10:09 Reply Quote 0
          • undefined
            Aitor @dc42
            last edited by 21 Feb 2022, 10:09

            Good morning @dc42, @stephen6309, @maracmb

            I'm doing a test with a machine with 4 independent heads, to verify if I can put more heads on the machine.

            I look at the link you sent me and I'll check my options.

            Thanks

            1 Reply Last reply Reply Quote 0
            3 out of 5
            • First post
              3/5
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA