Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Y axis motor not responsive

    Scheduled Pinned Locked Moved
    CNC
    2
    2
    94
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • newbee87undefined
      newbee87
      last edited by

      Hi, hoping someone can help a fresh white belt in CNC.

      I have a Workbee z+1 with duet3d wifi using DWC. At first one of the Y axis motors was jerking and lagging behind the other, now it is not responding at all.

      I've fiddled with the coupler etc and tested the mechanics, tested both the motor and the cable and they all seem fine. Wiring to board is also correct so I've kind of run out of ideas. Is there anything I should be looking for in sys/config or elsewhere that might be instructing that stepper motor specifically?

      Any help much is much appreciated.

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Can you post your config.g and the results of M122?

        What commands is it running when you are having issues?

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA