endstop plugin wont install
-
This post is deleted! -
Which version did you download?
-
This post is deleted! -
I just tested 3.5 b1 and it installed and worked correctly.
I suggest you try uploading the 3.5 b1 firmware and DWC file again, and then the plugin file. Grab a fresh download of each first.
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.0beta1/DuetWebControl-SD.zip
-
This post is deleted! -
That may explain it. Test in Firefox or Chrome and see if it works correctly.