Baby-Step Save to Offset
-
Hello,
I've been setting up some tools on my Toolchanger and tuning the offsets (especially if you're changing nozzles often) can be a pain. The values are close but require baby-stepping to tune perfectly.
It would be nice to have a "Save Tool Offset" button under Z-Babystepping that would change the G10 tool offsets in Z in config.g (or perhaps have another parameter to specify a system file or macro that contains the offsets). It would then set the Babystepping value to zero so the Babystepping value wouldn't affect other tools.
Thoughts?
