Flash custom firmware to MB6HC in SBC mode
-
I was hoping to play with some firmware features. I have built Duet3_MB6HC_no_SD for project RepRapFirmware. I note that there are update instructions when it is not in SBC mode. But the SBC mode setup does not mention anything about uploading custom firmware. Can I still just upload the firmware via DWC? I see there is an "Upload Firmware Files" button and I have built a
Duet3Firmware_MB6HC.bin. Also should I be using the Duet3_MB6HC_no_SD configuration or the Duet3_MB6HC configuration? I assumed the first since the SD card is in the connected Raspberry Pi. -
@sh54 Yes, you can upload your custom firmware build on the Files -> System page and install your firmware build that way.
-
@chrishamm Thanks for the very quick reply! Just to confirm I should be building it with the Duet3_MB6HC_no_SD configuration?
-
@sh54 For the 6HC and SBC mode just use the regular MB6HC build.
