Suddenly, information windows at the bottom of the DWC page
-
My DWC 3.5.1 has started throwing up windows that look like this at the bottom of the DWC page, right in the middle, blocking what I want to look at. The window looks like it is giving a command-by-command commentary on what is happening. Which is not really very interesting.
Why is it doing this and can I turn it off? I use the FIrefox browser.
It does not go away and is constantly updating. It only just started doing this when I connected with the Simplify3D 5.1 version slicer.
be well,
DLC -
@dlc60 It's Simplify3D that keeps sending status requests to the Duet via HTTP, which creates a lot of extra messages on DWC, too. I suggest you don't use the Simplify3D Machine Interface, it shouldn't be needed if you have DWC open anyway.
-
@chrishamm said in Suddenly, information windows at the bottom of the DWC page:
@dlc60 It's Simplify3D that keeps sending status requests to the Duet via HTTP, which creates a lot of extra messages on DWC, too. I suggest you don't use the Simplify3D Machine Interface, it shouldn't be needed if you have DWC open anyway.
That was humbling. I should have known that. I am not used to the new S3D's interface and didn't realize what that connection actually meant.
Thanks for the heads up.
be well,
