Can't get connected
-
New user; relatively experienced computer user.
Duet Ethernet connected to a desktop computer using USB (no ethernet yet). Firmware version is 1.18. But, before I upgraded, I thought I should be able to see the Duet board.
It fails at Step 8 which says "After about 30 seconds," the reply "ok" comes back right away. DUETTEST.LOCAL fails (times out). Yesterday, I got an IP and that timed out also.
YAT says serial port COM3 (9600, 8,1, None) is open and connected.
Can anyone help me?
-
Oops, looks like I needed to connect to ethernet first. This was not included in the instructions.