Looking for hypercube evolution config files
-
Hi!
I just build a hypercube evolution 300x300x300 with duet wifi
There must be a lot of users with the same hardware out there.
As I am new to duet wifi, i would be nice, if s.o. could give me the config/ firmware files as a point to start with.thx in advance!
Martin
-
I have a D-Bot CoreXY. Pretty similar to the HEVO. You can take a look at what I have if you like. I've tried to make my configs as well documented as possible.
https://www.dropbox.com/s/cisdhh8ivf5w5or/Config V9.zip?dl=0
The Gcode wiki and the documentation wiki should be permanently open in your browser too during setup.
https://duet3d.dozuki.com/Wiki/GCode
https://duet3d.dozuki.com/ -
You can check my configs here:
https://github.com/zen/zHevoThis branch contains experimental configuration with BLtouch
https://github.com/zen/zHevo/tree/bltouchI'm till testing it, a lot of problems with the clone. If you have questions just let me know.
