Slow resume on 2.02RC5

patakopecek · 9 Dec 2018, 08:58

Hi, I have set the speed for pause and resume to 60000mm/min but the resume uses the last print move speed instead of the Fnn parameter in the G1, did not have this problem on 2.02RC4

dc42 · 9 Dec 2018, 09:09

If you mean that the F parameter on the G1 R1 move at the end of resume.g isn't working, it's because that move as a whole isn't working properly. Fixed in RC6.

patakopecek · 9 Dec 2018, 09:14

Thanks, exactly what I needed to know