• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Fan 2 (P2) percentage on Dashboard

Scheduled Pinned Locked Moved
Duet Web Control
4
5
589
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Hornetrider
    last edited by 5 Jan 2019, 00:09

    Hey,

    does anybody know how I can get to see the % Setting of FAN 2 on the Dashboard or Current Job-Status overview?

    Thx

    1 Reply Last reply Reply Quote 0
    • undefined
      aidar
      last edited by 5 Jan 2019, 07:28

      If i remember correctly (someone can correct me if i am wrong 🙂 ), then fans with thermostatic contol doesnt show up in DWC. So if you want to see fan control and status you should disable thermostatic control (with H-1 parameter in M106 command).

      1 Reply Last reply Reply Quote 1
      • undefined
        Phaedrux Moderator
        last edited by 5 Jan 2019, 18:54

        That's correct. Thermostatic controlled fans are controlled by the temperature of the configured heater. Allowing it to be overridden by the slider could be detrimental. (turning off the hotend fan during a print for example.)

        More detail on fan control:
        https://duet3d.dozuki.com/Wiki/GCode#Section_M106_Fan_On

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • undefined
          Hornetrider
          last edited by 6 Jan 2019, 11:13

          Hey,

          thx for the tips.

          I found in the DWC instructions also an additional information.
          Not named Fans/Heaters won't display either.
          By using M305 a name can be assigned...will have to try that one.

          In this case it is just for information, to see if my board cooling fan is turned on or not...

          Have a nice Sunday.

          1 Reply Last reply Reply Quote 0
          • undefined
            dc42 administrators
            last edited by 6 Jan 2019, 11:28

            Fans can be named too (sere the M106 link above), but I don't know whether named fans are displayed in DWC2 when they are thermostatically controlled.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            2 out of 5
            • First post
              2/5
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA