• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

M997: File DuetWiFiServer.bin not found

Scheduled Pinned Locked Moved
Firmware installation
4
21
2.6k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    totalitarian
    last edited by 2 Mar 2019, 08:30

    Just tried two newly formatted cards and get the same problem.

    M21: Cannot initialise SD card 0: Card is unusable

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by dc42 3 Feb 2019, 09:01 2 Mar 2019, 08:59

      Looks like there may be a problem with the SD card socket then. When you run M122 with an SD card in the socket, does the report say that the SD card was detected, or not?

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        totalitarian
        last edited by 2 Mar 2019, 09:37

        SD card 0 detected, interface speed: 0.2MBytes/sec

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators
          last edited by 2 Mar 2019, 09:41

          So it's not the card detect switch that's the problem. It's probably one of the contacts in the socket, or the processor.

          Have you ever used a SD card extender with the microSD card socket?

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • undefined
            totalitarian
            last edited by 2 Mar 2019, 09:43

            @dc42 said in M997: File DuetWiFiServer.bin not found:

            SD card extender

            Sorry no, should I?

            1 Reply Last reply Reply Quote 0
            • undefined
              dc42 administrators
              last edited by dc42 3 Feb 2019, 09:46 2 Mar 2019, 09:45

              @totalitarian said in M997: File DuetWiFiServer.bin not found:

              @dc42 said in M997: File DuetWiFiServer.bin not found:

              SD card extender

              Sorry no, should I?

              Definitely not! SD card extenders can damage the socket.

              If your Duet is under warranty, please ask your supplier to repair or replace it.

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              1 Reply Last reply Reply Quote 0
              • undefined
                totalitarian
                last edited by 2 Mar 2019, 09:46

                It is 2 years old so I guess not. Time to buy a replacement I guess. Thanks for helping anyway 🙂

                undefined 1 Reply Last reply 2 Mar 2019, 11:08 Reply Quote 0
                • undefined
                  dc42 administrators @totalitarian
                  last edited by 2 Mar 2019, 11:08

                  @totalitarian said in M997: File DuetWiFiServer.bin not found:

                  It is 2 years old so I guess not. Time to buy a replacement I guess. Thanks for helping anyway 🙂

                  It's probably possible to repair it. The soldering on the SD card socket pins and the resistor behind it would need to be checked, if nothing is found then the SD card socket replaced, and if that doesn't work then the processor replaced. Which country are you in?

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    totalitarian
                    last edited by 2 Mar 2019, 11:13

                    UK, I bought directly from duet.

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      dc42 administrators
                      last edited by 2 Mar 2019, 11:18

                      If you want to send it to me I can take a look, although it may take a little while due to my workload. So you should probably still buy a replacement.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        totalitarian
                        last edited by 6 Mar 2019, 20:31

                        New duet fitted and printer now back on online.

                        This is the state of the faulty duet. Sure you still want to take a look at repairing it? Looks pretty charred to me...

                        0_1551904255622_32030778-13e3-47ab-ad4d-81938f545dbd-image.png

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          Phaedrux Moderator
                          last edited by 6 Mar 2019, 21:50

                          😲 Gruesome.

                          Z-Bot CoreXY Build | Thingiverse Profile

                          1 Reply Last reply Reply Quote 1
                          • undefined
                            dc42 administrators
                            last edited by dc42 3 Jun 2019, 22:25 6 Mar 2019, 22:24

                            That does look bad. From the distribution of the soot, it looks to me that something may have caught fire above the Duet, not on it. But you would need to clear away the soot and check for burned traces under it to be sure.

                            Duet WiFi hardware designer and firmware engineer
                            Please do not ask me for Duet support via PM or email, use the forum
                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              totalitarian
                              last edited by 6 Mar 2019, 22:34

                              The board is mounted upside down, nothing below the board except my desk. Strange one indeed.

                              0_1551911674348_b9569cdd-e8a4-49c9-9df0-fd232a42fead-image.png

                              0_1551911681422_323deee3-168c-4bd5-bdce-c449a266ccb9-image.png

                              1 Reply Last reply Reply Quote 0
                              17 out of 21
                              • First post
                                17/21
                                Last post
                              Unless otherwise noted, all forum content is licensed under CC-BY-SA