Duet Board2 Wifi connection to Enterprise network ieee 802.1x
-
Hi,
how can i connect the Duet Board2 wifi to our Enterprise Network?
I need to set 1. the acces point 2. the username and 3. the password. But in the configuration tool there is no possibility to set an username.
-
Hi,
looks to me that 802.1x is not implemented in the RRFirmware according to gcode documentation.
and here:
https://duet3d.dozuki.com/Wiki/Gcode#Section_M552_Set_IP_address_enable_disable_network_interface
Rgds
Jan -
It seems so. Is there a way to implement it in the RRFirmware?
-
I guess there would probably be, but I would have doubts that it would be done. Probably more a WiFi Board thing anyway. Seems a rather isolated issue by the looks of it, I would consider a wired board and have that hooked up to a switch or if it has to be WiFi use a stand alone WiFi client device capable of 802.1x and hook up your ethernet to that.
Jan P.
-
This may be a temporary work around: https://duet3d.dozuki.com/Wiki/Gcode#Section_M589_Configure_access_point_parameters
Setting up the duet to work as an access point allows it to create it's own wireless network which you can connect to from your control device.
