Progress Display with Prusa Slicer
-
I've recently switched to Prusa Slicer from S3D, and while I am generally satisfied with the print quality, I'm having trouble with the print time / progress display. For example, in the DWC status display, the jobs are always shown as "100% (0 of n layers)". I'm pretty sure I just forgot to change a setting in the slicer somewhere - which settings influence this behaviour?
-
you need the latest 2.03RC if you want prusaslicer progress
-
@Veti I thought the progress was calculated by the board by tracking the time and extruded length. Is it just using the hints from the slicer?
-
for the filament uses yes, the comments are used.
