DWC Retract command disabled
mihaitintea last edited by
I have the Duet2 Wifi with 2.05 firmware:
Board: Duet WiFi 1.02 or later
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 2.05 (2019-12-13b1)
Duet WiFi Server Version: 1.23
After heating the hotend, I still cannot click on the screen on the "Retract" button because that button is disabled. I have to revert back to DWC1 in order to have an enabled "Retract" button displayed in the web interface.
Is this a bug ?
Are you sure that you have selected a tool?