Sequencing issues with Duet3 and Exp boards
RobMink last edited by
I am still getting occasional sequencing issues with my Duet3 and exp03 boards. The printer will not wait for the gantry to be in the right position to execute a tool change using the servo. The servo is on the main board and the core xy motors are on exp03 board 1.
This does not happen all the time, but often enough to mess up a print. DWC 3.1.1, RC11. I am wondering if this issue would go away if I put the core XY motors on the same board as the servo.
Thanks in advance!
Are you actually using RC11? Time to update everything to 3.1.1