Counting printed layers, several parts at once.



  • Tell me, can a duet count the number of printed layers if there are several details on a table? Why can't I see it?

    IMG_20200620_103301.jpg

    слои.JPG


  • Moderator

    Post your slicer start and end gcode.



  • start-stop script is not to blame.
    today I was printing the other four models at the same time, the Duet displayed layers.

    Start

    G21
    G90
    M82
    M107
    G28
    G1 Z35 F1000
    G92 E0
    G1 E17 F250
    G1 X55 Y0 Z0.3 F2200
    G92 E0
    G1 X95 Y0 E2.5 F800
    G92 E0
    G1 X150 Y0 E2.5 F1500
    G92 E0
    M117 Printing...
    

    Stop

    M104 S0 ;extruder heater off
    M140 S0 ;heated bed heater off (if you have it)
    G92 E0 ;relative positioning
    G1 E-1 F300  ;retract the filament a bit before lifting the nozzle to release some of the pressure
    M107
    G91
    G1 H1 Z+5 E-3 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
    G90 ;absolute positioning
    G28 Z0
    G28 Y0 ;move Y to min endstops so the head is out of the way
    G28 X0 ;move X to min endstops so the head is out of the way
    M84 ;steppers off
    M1
    

  • Moderator

    Firmware version please.



  • Release 3.1.1


Log in to reply