Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    3.11 Duet Web Controll disconnected and unresposive

    Duet Web Control
    2
    7
    91
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • janr
      janr last edited by

      Hello, I just upgraded firmware to latest 3.11 and every browser returns disconnected, inresponsive UI.

      YAT says:
      FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.1.1 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2020-05-19b2

      WiFi module is connected to access point and have IP address

      Installation process:
      I copied files from Duet2and3Firmware-3.1.1.zip to sys on SD card from my computer.
      Reinserted SD card to board.
      Connect with YAT.
      Connect to wifi M552 S1
      Run M997 S0
      Reset
      Run M997 S1
      Reset

      Really strange thing is that twice it randomly was get conncted

      Any suggestions?

      Thanx

      1 Reply Last reply Reply Quote 0
      • janr
        janr last edited by

        Now, after countless reload .

        1. Button in the left top corner changed color to green, but next to red buttonon the left si Gray rectangle with text Disconnected.
        2. Menu items are clickable, but Configuration file tab says loading.
        3. In the middle next to My Duet is yellow rectangle with "some axes are not homed"

        After next page reload same unresponsive UI
        😕

        1 Reply Last reply Reply Quote 0
        • Phaedrux
          Phaedrux Moderator last edited by

          Can you try replacing the contents of the /www folder on the SD card with the contents of this zip file?

          https://github.com/Duet3D/RepRapFirmware/releases/download/3.1.1/DuetWebControl-SD-3.1.1.zip

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • Phaedrux
            Phaedrux Moderator last edited by

            Also, clear your browser cache.

            Z-Bot CoreXY Build | Thingiverse Profile

            1 Reply Last reply Reply Quote 0
            • janr
              janr last edited by

              Thanx for answer! 🙂
              I am definitely doing something wrong.
              Now page says
              "Your Duet rejected the HTTP request: page not found"
              😕

              I unzipped file to www folder on the card - and the browser says that
              Tried to type M997 S1 - same answer from browser
              I unzipped all the .gz files - same
              tha again M997 S1 - same

              before this i tried to return to other versions of firmware and always did M997 S1 and M997 S0.

              never got connected to board
              im startin to think that board is bad 😞

              1 Reply Last reply Reply Quote 0
              • janr
                janr last edited by

                Hello 🙂
                Again thanx for your help!

                I am not sure what I did differently but after uploading 2.05 firmware and dwc board start working. Now works every other FW too.

                Strange, but I am happy 😄

                1 Reply Last reply Reply Quote 0
                • Phaedrux
                  Phaedrux Moderator last edited by

                  Might have been missing an IAP file from one of the previous versions. There is a complete zip file with the main releases that contains everything needed. Usually best to go with that rather than the singular bin files.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Unless otherwise noted, all forum content is licensed under CC-BY-SA