Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Duet Maestro web control not responding when print from console

    Duet Web Control
    2
    2
    59
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dlc60
      dlc60 last edited by

      I am wondering if this is by design. When I print directly from the console on the printer, where I am using the Reprap full graphics controller, the DWC comes up, but will not talk to the printer. A ping will see the printer on the network, but the DWC will not respond to any button, reload, cache flush, nothing. I just get the interface but it is unresponsive.

      Is this by design so that a panel console print is not disturbed?

      DLC

      droftarts 1 Reply Last reply Reply Quote 0
      • droftarts
        droftarts administrators @dlc60 last edited by

        @dlc60 By 'print directly from the console on the printer', do you mean you are using a PanelDue or 12864 display? Neither should disconnect the web interface, so something is not quite right. Please post the Maestro firmware version (M115) and PanelDue (if that's what you're using) firmware version, and the DWC version.

        If you're using a 12864, what menu system are you using?

        Ian

        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 2 Wifi (in progress)

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA