Speed issue: Web-Interface vs. Telnet
-
Hi all,
I have an interesting problem with the Duet2.
I want to slowly move the z-axis down and then call a macro. The macro moves the Y axis back and forth several times very fast.
In my sequence I communicate with the Duet board via Telnet. If I call the macro after I slowly move down, the Y axis will also move slowly, although the speed is set in the macro.
If I call the macro from the web interface, it works.
If I call the macro via Telnet again, it will move slowly again.What is the reason for this? Are there two different speeds for Telnet and HTTP?
Many thanks.
Jonzy
-
iirc someone did some testing to find telnet faster, which makes sense as it has less (none) overhead; but telnet is also something that is likely to be deprecated in the future.
if you try to dig through some search results here you might find the posts
-
Please share the contents of the macro. There should be no difference in the behaviour.
