Resume print on cr10 s4 12v



  • HI would some help on resuming print
    My printer is 12v

    I keep getting this
    M98 P"0:/macros/Start Resume"
    Error: M24: Cannot resume while power voltage is low

    M911 S21 R23 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000

    ; Resume macro file
    G1 R1 X0 Y0 Z5 F5000 ; go to 5mm above position of the last print move
    G1 R1 X0 Y0 Z0 ; go back to the last print move
    M83 ; relative extruder moves

    Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
    Firmware Electronics: Duet WiFi 1.02 or later
    Firmware Version: 2.03RC4 (2019-05-29b4)
    WiFi Server Version: 1.21
    Web Interface Version: 1.22.6

    I would really love some help with this please guys cheers



  • @knehighprinter said in Resume print on cr10 s4 12v:

    Firmware Version: 2.03RC4 (2019-05-29b4)
    WiFi Server Version: 1.21
    Web Interface Version: 1.22.6

    release candidate firmware are not supported anymore once the final is released.

    please update to at least 2.05.1

    @knehighprinter said in Resume print on cr10 s4 12v:

    M911 S21 R23

    You configured your printer to resume on 23V. thats hard on a 12v supply



  • @Veti
    Thank for the info
    The machine been running well
    Most of my config are from others
    Who have posted info on my type
    Printer
    This config is something i had not touched and didnt realise this was set to 24v
    I will update and make the changes


Log in to reply