Duet3D Logo

    Duet3D
    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Powering Duet for lasers and external motors

    Laser Cutters
    2
    2
    49
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • infamous_panda
      infamous_panda last edited by

      Is it possible/good idea to just use a 5V usb supply to power up the duet if we are using two external motor drivers and maybe switching a two relays?

      1 Reply Last reply Reply Quote 0
      • A Former User
        A Former User last edited by A Former User

        Besides https://duet3d.dozuki.com/Wiki/USB_ground_loops there is nothing that can go wrong afaik, i suppose external drivers need a common ground to the duet?

        Having said that if it will work or not is subject to weather or not the firmware is only restricting motion on internal drivers when vin is below 10v or thereabouts. For sure if you have internal drivers configured the firmware does not allow motion when vin is missing (or below the threshold).

        Are your external drivers perhaps powered outside of the Vin range for the Duet or?

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA