Duet 3 6HC DWC

Regi5316

I am newbie to the Duet controller boards and have a question about the new Duet 3 HC6 board. How do you get to the DWC from my computer. Is there an default IP address or Hostname?

Stephen6309

@Regi5316 Unless you changed it for the SBC: duet3.local, for the standalone: printername.local, printer name is set by the M550 line in config.g or use the IP address the router assigned it.

Regi5316

Thanks for the information. When power up the board for the first time should I connect any stepper motors? I most likely need to update the firmware's.

dc42

@Regi5316 said in Duet 3 6HC DWC:

Thanks for the information. When power up the board for the first time should I connect any stepper motors? I most likely need to update the firmware's.

I suggest you power up initially with nothing connected except for Ethernet, and either VIN power or USB.

Regi5316

Thanks DC42!