Getting Network Error uploading firmware
-
I have a new Duet 3 6HC board and tried to upload the Duet2and3Firmware-3.1.1 file and keep getting this error.  I must be doing something wrong.
-
I tried uploading just 1 file and it gave me the same error!
-
Can I just move it to the SDC directly?
-
@Regi5316 said in Getting Network Error uploading firmware:
I have a new Duet 3 6HC board and tried to upload the Duet2and3Firmware-3.1.1 file and keep getting this error.  I must be doing something wrong.
Unfortunately your file upload to the forum failed. I get that sometimes when uploading from Chrome. What was the error message when you tried to upload the firmware file?
-
Just got my power back on. The error is this. "Failed to upload XXXXXXXXXXX file. Network error".
But now after the power failure it loaded fine. Must been the router??
-
Thanks for your time dc42!
-
@Regi5316 If you're using a Pi 4, I've found the Pi4 wifi chip has problems connecting to my router, unless it's in the right location. The only way it's realiable, is to use an ethernet cable.
