New Install - DWC - Can't make extruder turn

[rossfree21]

I'm sure it's my newbie configuration... I don't understand "tools" in the online Reprap Config Tool. Everything else is working... this is the last thing I'm trying to figure out.

When I execute the macro "extrude 5mm" DWC gives error "Attempting to extrude with no tool selected"

Something simple right? Please help.

Thank you,

Ross

[droftarts]

@rossfree21 See https://duet3d.dozuki.com/Wiki/Duet_Web_Control_v2_and_v3_(DWC)_Manual#Section_Tool_control

Then https://duet3d.dozuki.com/Wiki/Duet_Web_Control_v2_and_v3_(DWC)_Manual#Section_Extrusion_Control

Ian

[rossfree21]

Thank you for your reply Ian,

I didn't understand that the extruder heater had to be above a certain temperature to enable the extruder controls. It's working fine now.

Ross