Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    issues with scale tool changer

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    2
    2
    76
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • BorisVivienneundefined
      BorisVivienne
      last edited by

      Good afternoon
      So I've got a large scale tool changer, and I've been trying to get all my tool selection gcode tweaked to work really well.
      So now that I've tested a tool selection, the machine goes through ""tpre0.g"" as it should, but doesn't actually change the status of tool from 0 to active.
      And if I send another T0, the ""tpre0.g"" returns.
      Running 3.1.1 on Duet 3 with 3 tool boards and two external drivers.
      Regards

      "Change your life today. Don't gamble on the future, act now, without delay."

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Post your config and tool files?

        Also update to 3.2.2, including the tool boards.

        SBC or standalone mode?

        https://github.com/Duet3D/RepRapFirmware/releases/download/3.2.2/Duet2and3Firmware-3.2.2.zip

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA