Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    [Feature Request] 12864 Display Additional Value Calls

    Scheduled Pinned Locked Moved
    Firmware wishlist
    1
    1
    167
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jckrayundefined
      jckray
      last edited by

      This is a firmware feature request for additional functionality for 12864 displays.

      I would like to request additional values to be added to the alter/value list. I would like to be able to call all these values with the value function, but some may not be suitable for the alter function. They are listed in order of my personal priority.

      1. Tool material status (name of loaded material i.e. PLA, ABS, None, etc.) - value
      2. Mac Address - value
      3. Current Job name - value
      4. Printer Status (printing, busy, idle, etc) - value
      5. Tool offsets (X,Y,Z) ideally after altering an M500 would be triggered to save the new offset to config-override - value/alter
      6. Heater status (i.e. active, standby, off) - value/alter
      7. Slicer time estimate - value

      Please let me know if anything is unclear. Thanks!

      John
      Founder of Hydra Research LLC, developers of the open-source 3D printers and providers of 3D printing services.
      https://www.hydraresearch3d.com/

      1 Reply Last reply Reply Quote 1
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA