toolboard cables...

[A Former User]

Hi,

regarding the new toolbaord (https://duet3d.dozuki.com/Wiki/Duet_3_Tool_Board), for 2meter of cable, would these here work:

• Power 1x 2x 0,5mm^2:
  https://www.conrad.de/de/p/lapp-30964-1-datenleitung-unitronic-fd-cp-tp-plus-1-x-2-x-0-50-mm-grau-meterware-602835.html

• can 1x2xAWG26-7:
  https://www.conrad.de/de/p/kabeltronik-single-pair-ethernet-leitung-ethertronic-purflex-1x2xawg26-7-geschirmt-812265729.html

?

Best regards

[dc42]

@lbi thoss cables are overkill. For power I suggest something like https://www.conrad.com/p/tru-components-1565746-speaker-cable-2-x-080-mm-red-black-100-m-1565746. For CAN you can use unshielded twisted pair, either single pair if you have just one tool board (so it can be at the end of the CAN bus), otherwise 2-pair such as Lapp 0035101.