Connect fans on separate PWM to single virtual control
la_rd last edited by
On my duet 2 wifi + duex 5 there are two fans that cool the electronics bay. The intent is for these two fans to always match state.
Instead of wiring the fans together, I would prefer to create a software link that references both
bay fan2as something like
I would expect
electronics bayto appear in the UI as a single fan, which then controls
bay fan2in the background.
You could create two thermostatically controlled fans that monitor the same CPU temp. No UI, but if you tune the temp range it's just set it and forget it. Or do as I did in my case and wire the fans together in parallel.