Help installing self built RRF 3.3

[pjl]

Hello forum dwellers,

Disclaimer: I have never used eclipse, never built RRF until today, barely know anything about project structure and so on.

So I'm learning to build RRF (for duet3) so that I can edit it later on. I followed the guide on github, got everything to build, so far so good. But the result of building RRF is a folder full of .s .su .o .d files (not a clue what this format is or what to do with them), I also see Duet3Firmware_MB6HC.bin .elf and .map files along with some source files.

In short, I'm lost here, this resembles nothing from the prebuilt firmware files that are available for download, what do I need to put this stuff (and what stuff) onto my duet board?

Thank you for your patience,
Kind regards,
P

[dc42]

@pjl the Duet3Firmware_MB6HC.bin file is the firmware file, the same name that you will find in the prebuilt firmware.

[pjl]

Thank you @dc42, well I feel pretty dumb right about now.

I was expecting more things after looking at firmware update instructions. What about the IAP binary? "programming the firmware" sounds kinda important as mentioned in the docs.

[dc42]

@pjl you should be able to use the standard IAP binary, assuming that you haven't modified the IAP functionality in your fork of RRF. The IAP is built from a separate Eclipse project, DuetIAP.