[3.4rc2 + SBC] No message prompts in homing files?
-
We wanted to add an M291 S3 message to our homing files to allow the user to verify the nozzle was clear of the build plate prior to any homing moves. However, when added a message to the beginning of our working homex.g file, we receive the following error for both the OK and Cancel selection.
Is this expected behavior?
G28 X Error: Homing failed -
undefined oozeBot marked this topic as a question
-
undefined Phaedrux moved this topic from Tuning and tweaking
-
@oozebot this was also a problem with 3.4RC2 in standalone mode, and it has been fixed in RC2+2 available at https://www.dropbox.com/sh/amtiizdcylnuaye/AAA4hzXFvU0RMOSDtdT37HFua?dl=0. You can upgrade a 3.4.0RC2 system with SBC to this version just by uploading the firmware file through DWC.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
undefined oozeBot marked this topic as a regular topic
-
undefined oozeBot marked this topic as a question
-
undefined oozeBot has marked this topic as solved
-
@dc42 That fixed it! Thanks. I guess we missed the RC2+2 announcement. We just updated our test machine and are vetting it now.
-
undefined dc42 referenced this topic