M558 Set max depth independantly
-
Please add the ability to specify Maximum Depth in M558 independently from Dive Height.
With my Voron 2 style machine for auto gantry levelling, when powered off gantry will sag, 15+mm I only need to raise it about 5mm, but need about 20-30mm max depth incase its very out of alignment.
Example
M558 K0 P5 C"^zprobe.in" H5:20 F1000:500 60 T9000 A1 S0.01
H5:20 with 5 representing Raising, and 20 representing Max depth
