RFF3.42 display the extruder speed
-
@dc42 Hello Someone can explain to me how to view the E0 + E1 extruder speed DURING THE PRINTING PHASE ?
-
@paolozampini1973 RRF doesn't currently provide the instantaneous extrusion speed in the object model. I can look at adding that in RRF 3.5.
Currently the best you can do is to read move.extruders[n].position or move.extruders[n].rawPosition at intervals and calculate an average extrusion rate over the interval from the increase in value.
-
@dc42 said in RFF3.42 display the extruder speed:
@paolozampini1973 RRF doesn't currently provide the instantaneous extrusion speed in the object model. I can look at adding that in RRF 3.5.
Currently the best you can do is to read move.extruders[n].position or move.extruders[n].rawPosition at intervals and calculate an average extrusion rate over the interval from the increase in value.
Thank you for replying. Yes, I would be really very very USEFUL How long do you wait for RFF 3.5? Thank you