Wifi setup complited and connect to the computer

patel

I getting message 1) Attempt to move the head of a delta or scara printer before homing the towers. 2) massage from duet firmware ( config…)

Firmware Name:
RepRapFirmware for Duet WiFi

Firmware Electronics:
Duet WiFi 1.0

Firmware Version:
1.19.2 (2017-09-01)

WiFi Server Version:
1.19

Web Interface Version:
1.19
Web Interface by Christian Hammacher
Licensed under the terms of the GPL v3

and one more think when I press x axis motor X-100. result rotate X,Y axis Motor both together

M120
G91
G1 X-10 F6000
M121
Attempt to move the head of a Delta or SCARA printer before homing the towers

dc42

You need to generate config.g and homing files to match your printer characteristics, and upload them to the SD card. See https://duet3d.com/wiki/Configuring_RepRapFirmware_for_a_Cartesian_printer. You can use this tool https://configurator.reprapfirmware.org/ to generate them.