Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    FIRMWARE Update 1.18.1->1.19.2 Duet Ethernet + Duex5 + PanelDue

    Scheduled Pinned Locked Moved
    Firmware installation
    2
    3
    802
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Duet_Noobundefined
      Duet_Noob
      last edited by

      Hello,
      I would like to equip the current machine I build for the company with a Duet Ethernet.
      At the moment the control via Ethernet is not yet possible, first everything has to be done via USB and SD card. If the 3D printer runs then, I will apply for the Ethernet connection. Is something complicated in the company.

      https://www.dropbox.com/sh/kudo7cjtqjyj8ec/AAApb6iT7HNNJaXLzGdDa5EDa?dl=0

      Now for my first request:

      I want to update the firmware. Have connection to Duet Ethernt made via USB and after sending from M115 came:
      12:30:29.704 : serial: N15 M115*18
      12:30:29.704 : FIRMWARE_NAME: RepRapFirmware for Duet Ethernet FIRMWARE_VERSION: 1.18.1 ELECTRONICS: Duet Ethernet 1.0 FIRMWARE_DATE: 2017-04-09

      To get to 1.19.2 do I first have to be loaded 1.19?
      Everything according to this guide: https://www.duet3d.com/wiki/Upgrading_to_DuetWiFiFirmware_1.19

      How is this with the Ethernet access data that I do not know all yet, since they are given later by the IT department?

      Regards Andy

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        You can upgrade to 1.19.2 directly from 1.18.1. It's easiest to upgrade using the web interface, but if you don't have that working yet, use this procedure: https://duet3d.com/wiki/Common_problems_and_their_solutions except that for the Duet Ethernet the firmware file is called DuetEthernetFirmware.bin not DuetWiFiFirmware.bin.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • Duet_Noobundefined
          Duet_Noob
          last edited by

          Hello DC42,

          I use a Duet Wifi at home, so I already have a web interface here. Have now taken the Duet ETHERNET from the company home. Hope this is the easier way to update the firmware.

          Have downloaded the firmware 1.19.2.

          https://www.duet3d.com/wiki/Upgrading_to_DuetWiFiFirmware_1.19

          Now after this guide Duet Ethernet firmware and Web control in the appropriate folder?
          The contents of DuetWebControl-1.19.zip, extracted into the /www folder. …...
          DuetETHERNETFirmware-1.19.bin, extracted in / sys

          https://www.duet3d.com/wiki/Updating_more_than_one_firmware_at_a_time
          Can I now use the existing web interface the Duet Ethernet
          update with M997 S0: 1?

          Is this with or without spaces after the colon?

          Doing the upgrade
          Send M997 S0:1 to upgrade both firmwares together.
          When the Duet has restarted after the firmware upgrade, execute the SetNetwork macro on PanelDue or via USB (if using USB then the command is M98 P/macros/SetNetwork).
          Send M587 and check that your network is listed
          Send M552 S1. After a few seconds you should see a message that it has connected to your access point.
          Connect via the web interface
          Re-enable the M552 S1 command in config.g by removing the semicolon at the start
          For security, delete the SetNetwork macro file

          Thank you for the very nice help!

          Andy

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA