G-Code viewer starting in the middle.
-
I've just updated to 3.5.2, but this was also happening at 3.5.0. I updated so I wouldn't be told to update ... and it's very obviously still happening.
While the following screenshot was taken, the printer was working on the first layer of my model. AFAICT, the position of the tool is correct. The amount of the model showing is not.
I think the step it's highlighting is also wrong, but I have trouble parsing that.
Here's the versions:
-
@zBeeble Hello, I have a fix that I need to get put into place in DWC that will address this issue.