Flag to exclude fan from M106 and web control



  • Having accidentally added the hot end cooling fan to the web interface then shut it down mid print by mistake with inevitable (and messy) consequences I would appreciate a safety net to ensure that the fan stays on if the temperature is over the threshold.

    I would like to suggest an additional flag on the M106 T parameter to either disable manual control of temperature controlled fans or ensure that it stays on if the temperature is over the threshold.

    Not the highest priority, I accept, but useful to other dummies like me out there.


Locked
 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.