Random "M25 resume-after-power-failed state saved"
-
For some reason my printer has been randomly stalling and buffering mid print (ie: 5-10 second pauses between moves mid print). Once this starts there is no way for the printer to return to normal operation without a hard reset. This is occurring the same time that there have been some "M25 resume-after-power-failed state saved" showing up in the web interface even though the printer power supply isn't dipping voltages.
Above is a link that shows the stuttering i am talking about.
-
What's your voltage threshold for triggering a power loss save?
-
If it's a Duet Ethernet, try upgrading to firmware 1.21RC3, or set a static IP address instead of relying on DHCP to allocate one.
