-
@dc42 Please add the same way as WCS as well ToolOffsets.
PS: I would vote for option (a) even though (c) is fine as well as behavior (a) can be kind of mocked up using macros.
-
Hi, I just wanted to see if a unified scheme for restore points was sorted? And that restore points will now go back to the correct position for the work coordinate systems, without having to manually select the work coordinate system before resuming?
In addition, I was testing the power loss resume today, and it seems that it ignores which coordinate system was selected when the file was running. Even manually selecting the coordinate system before resuming doesn't seem to work. I tested this today on 2.02 RTOS
Ryan Lock
-
@ryan-lock said in CNC Coordinate Systems:
Hi, I just wanted to see if a unified scheme for restore points was sorted? And that restore points will now go back to the correct position for the work coordinate systems, without having to manually select the work coordinate system before resuming?
In addition, I was testing the power loss resume today, and it seems that it ignores which coordinate system was selected when the file was running. Even manually selecting the coordinate system before resuming doesn't seem to work. I tested this today on 2.02 RTOS
Ryan Lock
I am out of the office, but AFAIR I fixed this in the 2.02 release.
-
Is there currently any way to probe in directions other than Z? I see G38.x isnt supported, and G30 only takes x and y for locations to do the Z probe.
G38.x would be nice to have for CNC.
-
@bearer said in CNC Coordinate Systems:
Is there currently any way to probe in directions other than Z? I see G38.x isnt supported, and G30 only takes x and y for locations to do the Z probe.
G38.x would be nice to have for CNC.
Look up M585 in the GCodes page of the wiki.
