Please move "Estimator" tracking and calculations to firmware
Yonkiman last edited by
I'm running an ~36 hour print, and overnight somehow communication was lost. An M552 S1 got the web interface talking to the firmware again, but all the Print Time estimates are gone. Filament Usage and Layer Time have been "n/a" for the last 6 hours, and File Progress has been stuck at 24h 16m 31s since I reestablished communication.
I'm going to keep trying to solve my disconnect issues, but it seems like it would be a good idea to keep all the data required for these estimates in the firmware, so the estimates can survive a disconnect or a surprise Microsoft OS update.
The estimates are already generated and maintained by the firmware. So I am surprised that DWC isn't showing them. Reloading DWC might help.