Named fans don't appear in DWC when in thermostatic mode
Googliola last edited by
I have a separate heatsink cooling fan for all my extruders
M106 C"Heatsink fan T0" P3 H3 T50:100
and I would like to see them in DWC. Problem is that as soon as I enable thermostatic mode with Hn, the fan wont be added to list of fans. I am aware that I cannot control the fan in thermostatic mode, but it would be handy to check if the fans are running correctly.
I've moved this to the DWC Wishlist section.