Auto Delta Calibration



  • I just did a big jump firmware upgrade from 1.17 to 2.02 which overall went smoothly. The issue is that Auto Delta Calibration is now behaving strangely. Now between each calibration point the head goes through a strange and lengthy movement sequence.

    Any ideas what I missed here?

    Tom Johnson



  • OK, I found it myself. The files deployprobe.g and retractprobe.g needed to be removed from the /sys directory. Now it works like it did before.

    Tom Johnson


 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.