I use M291 message box quite a lot in my macros but they are always positioned at the top of the DWC display.
Is there a way to tell M291 that I want the box to be at the bottom of the screen for example?
If not where do I ask for this to be added to DWC
appjaws - Core XYUV Duet Ethernet Duex5
firmware 3.4.4 Web Interface 3.4.4
Ormerod 1-converted to laser engraver, Duet wifi
OpenSCAD version 2022.10.09
slic3r-1.3.0, Simplify3D 4.1.2, Cura-5.2.1