Unable to see DWC on Duet 2 ethernet only. Connected ethernet cable to the board and other end to my mac. Used M552 S1 P192.168.0.1 and set computer ethernet to 192.168.0.2. Set address in search bar to 192.168.0.2 but it was unable to connect. Also tried 192.168.0.1 and different combinations but have never seen the DWC. Tried the same thing with different addresses (192.168.2.#),different browsers and even windows 10 and I got the same result every time (unable to connect).

No wifi options are possible due to agency guidelines. Board connected to 22 Idex Vision Miner

Ethernet shows green bubble and says that it is connected when the cable is connected between the two.

Any suggestions on what I might be doing wrong? My goal is to pull up the DWC in a web browser, but it seems like I just can't figure it out.

Thanks for your help

Followed steps for Wired Direct Connection here:
https://docs.duet3d.com/User_manual/Machine_configuration/Networking

Followed steps for Connect Duet to Network (step 5 and previous steps) here:
https://docs.duet3d.com/How_to_guides/Getting_connected/Getting_connected_to_your_Duet

Firmware 3.4.0